View Desktop Site

ACTpro 200 Two Door Expander with 12v DC Boxed PSU for ACTpro Range of Controllers

£435.99

£523.19 Inc. VAT

Shipping: 1-2 days

ACTpro 200 Two Door Expander with 12v DC Boxed PSU for ACTpro Range of Controllers

 

The ACTpro 200 is a two door expander for the ACTpro door controllers, complete with built-in, monitored 3 Amp power supply. The power supply supports two doors, each with its own fuse and battery support. On-board LEDs are provided for fault indication and faults are reported to the controller and PC. An 18swg mild steel cabinet provides ample room for wiring and batteries, and the lid will accommodate two ACTpro 101 door stations.

Main Features

  • Two door station / expander
  • Controls 2 doors
  • Built-in 3 amp monitored PSU
  • Battery deep-discharge protection
  • Fuse blown LED indication
  • 18 swg mild steel cabinet
  • Mains fault indication
  • Supports 2 x 7AHr batteries
  • Accommodates 2 x ACTpro 101 PCB door stations
  • Mounting points for ACTpro 101 PCB door stations on lid
  • Supports entry / exit readers
  • 2 x 1.25 Amp Volts regulated power supply outputs
  • Alarms are monitored via ACTpro door controller & ACTenterprise software
  • Each door has a 5amp, 30 volt DC lock relay and a 1amp, 24 volt DC alarm relay

Installation Guidelines

  • For indoor use only
  • The ACTpro 200 connects to ACT controllers on the DOORS network
  • The ACTpro 200 is compatible with all versions of ACTpro 2000 and ACTpro 4000 controllers
  • Up to 7 ACTpro 200s can be connected to a controller
  • ACTpro 200 and ACTpro 100e may be connected on the same network (maximum 16 doors including controller)

Product Specification

  • Mains Voltage: 230V AC +10% - 15%
  • Frequency: 47 - 63 Hz
  • Operating Temperature: 0 to +50 C
  • Weight: 4.8Kg
  • Dimensions (H x W x D, mm): 355 x 370 x 85
  • Mounting: Surface
  • Installation: Indoor
  • Mains Fuse: 630mA
  • Lock Fuse: 1.25A Quick Blow
  • Ripple Voltage:

 

Quick Code: 3608
Recently Viewed
Loading...